Select over 2 select queries New player decision paralysis Do defunct films formats really mean the pictures can never be seen? m 0 l Alabalcho September 30, 2013 10:44:52 AM http://www.bootdisk.com/bootdisk.htm - it seems they have what you need m 0 l Can't find your answer ? Honestly, if you have no appreciation for old hardware or software, then this is definitely not for you. If, however, you share my passion for technology, not only for the new Where can I get the driver for my CD-ROM? http://standardtechnological.com/cd-rom/cd-rom-drivers-for-dos-6-2.html
Configuration Now that we have a good editor and input processor installed, it's time to configure DOS itself. Installation is the same as SSH2DOS; copy bin\wget.exe c:\apps and you're done. This is another WATTCP-based application, so it should just work at this point. For convenience, move c:\apps\peditlgt.exe c:\apps\edit.exe. This will let you launch Pedit by simply typing edit, making it effectively replace the built-in DOS editor. However, there's one more major issue we need to take care of. Due to another bug in MS-Client, DNS does not work by default, nor is it possible to configure or http://manmrk.net/tutorials/DOS/cdrom.htm
that improves data transfer rates by storing frequently accessed data in RAM" (per Wikipedia), and is enabled by default in DOS. Some versions of DOS include the /x argument by default, Configure Pedit by running edit, hitting Esc if prompted to open a file, and entering Alt-F1. I like the following non-default settings: Editor Style - 2.0 Scroll Bar - dark on Network Options Now it's time to (finally) configure networking. Getting this up and running is extremely helpful because it largely eliminates the need for floppy disks. Unfortunately, networking under DOS is... I have added the following lines to the CONFIG.SYS and AUTOEXEC.BAT files, respectively: DEVICE=D:\CDROM\CDROM.SYS /D:MSCD001 /V and C:\DRDOS\MSCDEX.EXE /D:MSCD001 /L:F The former loads the driver into memory, and the latter configures
Note: Before installing, take a look at kernels.txt, which describes the different kernel drivers available. I use the minimal kernel, XFSKRNLM, because that meets my needs and takes up the least Prerequisites Old hardware - if it has ISA slots you're probably good to go; anything newer may require some extra work, but it should still be possible to get at least See: TOOGAM's Software Archive: CD drivers for DOS for details. The information is right, and is related to the topic of the CD driver, but the instructions provided are exactly what the question-asker is attempting to do, and so this answer
More about : dos rom rsmith13 September 28, 2013 1:47:51 AM It's been a long time but I don't think 3.1 came with cd drivers. How many molecules NADH are produced in the Krebs Cycle? I do not remember from years ago how to do this. All of this work will now let us (finally) do something very important: map shared network drives. This is especially useful as we can use this to easily copy files and
I recommend leaving the Start Options set to "Run Network Client". The Load Pop-up option is only useful if you plan on communicating with other LAN systems using the old netbios Note: If you are using a 3c90x card, you must edit oemsetup.inf before proceeding with MS-Client installation. Comment out (or delete) the following lines and save the file: ndis3=1:el90x.386 mlid=1:3c90x.com To DOS-related books on Amazon.com! — buy link here MS-DOS 6.22 CDrom Drivers Included 6.22 Category: OS Year: 1994 Description:Ms-DOS con CDROM Drive (MS-CDEX) Booteable Disk Manufacturer: Microsoft Corporation Localization: EN OS: Next, edit c:\config.sys and add/change the following (again, other settings should be left alone for now): SWITCHES=/f DEVICE=c:\dos\himem.sys /testmem:off DEVICEHIGH=c:\dos\emm386.exe ram i=b000-b7ff DOS=high,umb BREAK=on rem DEVICEHIGH=c:\dos\setver.exe The /f option to SWITCHES
Get the answer Best solution ex_bubblehead September 30, 2013 11:16:50 AM And failing Alabalcho's suggestion: http://manmrk.net/tutorials/DOS/cdrom.htm Share Can't find your answer ? Just what you see on the screen: Example : DEVICE=CDROM_DRV.SYS /D:MSCD001 [/DMA] /DMA --> Enable PCI Bus Master DMA Mode /UDMA --> Enable PCI Bus Master Ultra DMA Mode is almost The most widely compatible and widely used MS-DOS CD-ROM drivers are probably from Oak Technologies and Gold Star, both available from the Computer Hope hardware downloads page. Unfortunately, both are memory Click here it's easy and free.
Shailesh Sharma 503,334 views 7:52 Loading more suggestions... http://standardtechnological.com/cd-rom/cd-rom-drivers-for-dos.html This is also a good time to decide whether or not you want to automatically map shared drives on boot. If you do not plan on using shared drives, or you If necessary, use option 2 on your C: drive to flag the "boot" partition You will be forced to reboot after making changes To create (or reformat) a file system on Set the options for date, time, country and keyboard layout as appropriate, then choose "The settings are correct" to continue.
They helped! Thanks Logged WillyWSpecialist Thanked: 29 Experience: Experienced OS: Windows XP Re: Installing a CD drive on DOS 6.22 « Reply #1 on: January 30, 2007, 09:54:29 AM » QuoteHi everyone.I am Covalent and Ionic Bonds Why was it "acceptable" for Prince Charles to marry a divorced woman, when Edward VIII had to abdicate for marrying divorcee Wallis Simpson? http://standardtechnological.com/cd-rom/cd-rom-drivers-dos-6-22.html If you continue to have problems with different drivers, make sure that there's no conflicts of I/O address or IRQs (or DMA).
Best user friendly phone number format Make a ;# interpreter How do planets retain momentum? I then installed Windows 3.1 with no problem. Mouse Driver Next we'll install a mouse driver. This is optional, as DOS itself doesn't utilize mice, only the applications programmed to support them (such as Pedit). So, unless you plan
share|improve this answer answered Dec 2 '16 at 23:14 ZiggyStardust 958 add a comment| up vote 0 down vote I agree with the comment about removing MSCDEX from AUTOEXEC.BAT. Run the following command to initialize the kernel: loadhigh c:\apps\xfskrnlm.exe 0x60 Run the following to initialize the driver: If using BOOTP (a predecessor to DHCP; many DHCP servers can also support Order is important: be sure to leave the lines in the order I have listed above. I hope it was a pleasant trip.QuoteThanks for the links though!
Thanks in advanced for your help. I agree with the pause as the first line in the autoexec.bat to see just what the config.sys file did. Hit Enter if prompted to run CTCM, then again when asked about modifying your system config files, then a third time to continue installation For the drivers, I recommend installing to check over here All Rights Reserved.
Finally, the NEC_IDE.SYS as shown in the above example is the name of the driver; this name can be anything and located anywhere. Within your config.sys, add LASTDRIVE=Z before the CD-ROM driver line. Loading... Note: I provide download links for all discussed software in the relevant section where it's discussed. Links point to the original download location for each file wherever possible, but for the
So here's the deal with NFS under DOS: there's an old version of NFS for DOS called XFS Network File System Client. It was a commercial program, but as noted above If you're using MS-DOS 6 (or perhaps newer alternatives, like FreeDOS), then try holding F8 or Shift-F8 when booting. Below are examples of the format of how the drivers should be loading in your autoexec.bat and config.sys. CuteMouse provides support for modern mice and mouse features such as wheels (though few applications support the wheel), and is significantly smaller than MOUSE.COM, using only about 3.5 KB of memory
Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the First and foremost, you do not want a space between the LOADHIGH or DEVICEHIGH, these are one word. It is a very simple way to determing if the cdrom.sys is causing the problem.... This error is usually caused by the LASTDRIVE missing or not specifying enough letters for the CD-ROM to load.
If you have extra switches on either line, attempt to temporarily remove these lines to see if the CD-ROM works. Pedit - enhanced replacement of the stock EDIT editor, which will be useful for editing the DOS config files Info-Zip UnZip - open source Zip file extraction utility you can use Yes No Feedback E-mail Share Print Search Recently added pages View all recent updates Useful links About Computer Hope Site Map Forum Contact Us How to Help Top 10 pages Follow The first decision to make is to decide what kind of networking support you want installed. In brief, there are two types of drivers we're going to install: NDIS - the
Working... To install the driver, copy cdromdrv.sys to c:\dos. Then, edit config.sys and add: DEVICEHIGH=c:\dos\cdromdrv.sys /d:mscd001 The /d option sets a device name to be used by MSCDEX; you can set anything I commented out SETVER as it generally shouldn't be needed. Unless you plan on running particularly old (even by MS-DOS 6.x standards) software or drives, you can leave this disabled to