I use an old engraving machine that is controlled by PC 386, running win3.11 dos 6.2, all of a sudden for no apparent reason when I switch on it comes up Have to restart system then when start Windows with a switch option. You did a great job! Ok, suppose you tried doing it manually, and already did a sys a:, or made a bootdisk with windows and it still doesn't see your cdrom and you're at the end
IIRC, you just have a line in autoexec.bat like this: C:\DOSIDLE\DOSIDLE.EXE guest Posted on Thursday, May 24 2012 @ 05:03:37 PM by mahir256. @Kirsle All right, I changed the hard drive It should have enough RAM to allocate some to a virtual machine while still having >50% for the host OS. Thank you very much I have this in floppy but don't have floppy drive any more this is great help guest Posted on Friday, September 03 2010 @ 10:50:06 AM by Looking to revive an old Dell 3000 laptop but need the full disk set 3.1 OS.
CD-ROM Drivers MS-DOS and Windows 3.x (CD-ROM's for Windows are installed via MS-DOS but may have a Windows Setup available) In order to use a CD-ROM Drive, your computer must first I agree with the pause as the first line in the autoexec.bat to see just what the config.sys file did. I have been looking for windows 3.11 for a while. To begin, copy dis_pkt.dos to c:\dos\net. Next, edit c:\dos\net\protocol.ini and append the following: [pktdrv] DriverName=PKTDRV$ BINDINGS=TCM$EL90X INTVEC=0x60 CHAINVEC=0x68 The BINDINGS line needs to be modified for your hardware; everything else (should)
To install CuteMouse, copy bin\ctmouse.exe to c:\dos. Then, edit autoexec.bat and add: c:\dos\ctmouse.exe /3 CuteMouse supports quite a few options, so run ctmouse.exe /? So here's the deal with NFS under DOS: there's an old version of NFS for DOS called XFS Network File System Client. It was a commercial program, but as noted above OSx16 Operating System (MS-DOS Compatible) BOOT-CD Image And BOOT-USB Image Files ! Prerequisites Old hardware - if it has ISA slots you're probably good to go; anything newer may require some extra work, but it should still be possible to get at least
Hi I have copied my games folder on to a cd, but I cannot change to the cd drive in dos, help! When I boot MS-DOS from a floppy disk rather than the HD and remove that line from the file, the computer works just fine when I reboot from the HD. (Of Looks like a great site.
Show more Language: English Content location: United States Restricted Mode: Off History Help Loading...
To the ie5 question; ie5 won't run in windows 3.1x , I would try windows 98se or a "light" installation of win 9x. I'm happy with this site, with its rare programs guest Posted on Thursday, January 19 2017 @ 03:40:46 AM by CLAUDE KHAYAT. guest Posted on Monday, September 26 2011 @ 01:29:39 PM by Andrew. I have found the correct driver (http://www.driverguide.com/driver/detail.php?driverid=349099) and have followed the instructions in the manual (included in the driver download) to connect the drive to the system and install the software.
If you actually have a floppy drive, you'll have to flash these images onto floppy disks. Run the following command to initialize the kernel: loadhigh c:\apps\xfskrnlm.exe 0x60 Run the following to initialize the driver: If using BOOTP (a predecessor to DHCP; many DHCP servers can also support To map a drive, assuming you already have a shared drive properly configured in Samba or a Windows server (which is outside the scope of this HOWTO), run: net use e: Some Of those drivers supports standard (and OLD) VGA/SVGA Graphic Cards.
guest Posted on Tuesday, October 20 2015 @ 06:40:38 AM by Continuous. I've tried booting this startup disk, then switched to an MS-DOS floppy, then ran SETUP from there but it then get a message: To install MS-DOS, insert Setup Disk 1 in If you get a DOS prompt at that point then it is the cdrom.sys and you need to find a different one. guest Posted on Monday, March 16 2015 @ 10:42:15 AM by jake.
If you are using Win98 and your video drivers disk only has a Win95 folder then its certainly time to download the latest files for your video adapter from the manufacturers To INSTALL MS-DOS 5.00.224 BETA you must type INSTALL.EXE (SETUP) to setup MS-DOS 5.00.224 BETA. guest Posted on Saturday, October 01 2016 @ 04:23:40 PM by GRYFTech. ""Posted on Friday, September 30 2016 @ 07:23:01 PM by Johan. guest Posted on Friday, November 06 2015 @ 01:11:25 PM by DerDerCCX.
dalbaev!!!!!!!!!!!!!!!!!!!!!!!111 guest Posted on Sunday, August 22 2010 @ 11:50:55 AM by din100. It has a better - sleeker - shareware free menu. The following files are required for DOS networking for each of the listed NICs: 3Com 3C905C ndis2\dos\el90x.dos - NDIS2 driver ndis2\dos\oemsetup.inf - NDIS2 configuration file for Microsoft Network Client pktdvr\3c90xpd.com -
Windows 3.1 can still be installed from these images, it will just require more disk juggling. guest Posted on Tuesday, October 20 2015 @ 09:50:23 PM by Continuous. The extract gives me 3 .img file. http://allegro.pl/karta-pamieci-eye-fi-mobi-8gb-klasa-10-wi-fi-i5542057656.html Poland.
Hi Kirsle, Thanks for your reply. Installation is a bit tricky: Copy the following files to to c:\apps: xfskrnlm.exe hosts ls.exe xfstool.exe The rest of the executables can be useful for troubleshooting NFS connections, but shouldn't be guest Posted on Friday, September 09 2011 @ 10:44:13 AM by Pete Hera. Copy the contents [but not scsiboot.exe] to your bootdisk.
If you just run DOSIDLE.EXE by itself does it help? SmartDrive is "a disk caching program ... There are plenty of reasons for installing a legacy OS such as DOS (CMD is NOT DOS) and Win 3.11. Thank you for this great download.
guest Posted on Tuesday, June 10 2014 @ 03:24:54 PM by Attila. Thanks for these 3.1 disks. Design & Site Backend code © 2003, 2017 WinWorld Archive Stats: 70.6TB, 39,508 releases. [See more]. UP: 0d, 0h, 0m | CPU: % | MEM: MB of MB used BetaArchive Return to top Preparation Relevant Software: RawWrite for Windows - Unless you have physical installation media, you'll need to write the floppy disk images to real diskettes. RawWrite is a simple
The purpose of MSCDEX.EXE in autoexec.bat is to assign a drive letter to the device, hence, the /D:tomato has to be the same in both files. Also, when putting it in my AUTOEXEC, the whole system either freezes on startup (more common), or it gives a 'divide error' (or similar), keeping one of my cores at 100%. Watch Queue Queue __count__/__total__ Find out whyClose How to Install a CD-ROM Driver for MS-DOS ClarionCoder51 Loading... guest Posted on Sunday, August 09 2015 @ 10:04:55 AM by jack.
Do You Know Anything About OSx16 Operating System ? But so far I have no luck. SQL Server Geography vs DbGeography Generate all Sublist Partitions Understanding varchar(max) 8000 column and why I can store more than 8000 characters in it What is a pill's "envelope" called? Thanks to Mark O' If you want a mouse to work on your bootdisk copy mouse.com to your bootdisk and add a line in the autoexec.bat like this: mouse, or a:\mouse.com,
Acer's ATAPI CD-ROM driver (search for VIDE-CDD.SYS v2.15 on the linked page) is another option that uses only 5 KB, as is the modern UDVD2 driver for the FreeDOS project which Currently the CD-ROM drive is hooked up as a slave drive to the HD, and the jumper is set accordingly. I am using a external floppy drove/ Amy advise? Kirsle Hey, I did not know you could tell me a program to format floppys.
It will not be directly bootable, however. First see if there is a message when you first turn on your system like: "To Enter Setup Press" and make a note of it. If you respond, you will calm my nerves lol. Is there something I need to do to make these floppies bootable or something before I copy the image over to them?